PERKO 1301 User Manual
PERKO Lighting
Cat. No. 0120SWB Series White All-Round (Anchor) Lights (12 Volt)
Cat. No. 0170SWB Series White All-Round (Anchor) Lights (24 Volt)
Cat. No. 1301SWB Series White All-Round (Anchor) Lights (12 Volt)
The above lights are designed for use on sail or power driven vessels under 20
meters (65.6 ft.) in length operating on a nominal 12 or 24 volt system as indicated. In
order to comply with ‘72 COLREGS and the U.S. Inland Navigation Rules, the following
must be adhered to:
MOUNTING INFORMATION
Read all instructions before proceeding.
1).
For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-
16*, the ‘72 COLREGS*, and the U.S. Inland Navigation Rules*.
2).
These lights are designed to be mounted on a horizontal surface. Horizontal rotation
of these lights is unimportant, as all-round lights have 360° horizontal arc of visibility
3).
Cut out the template below. Tape it to the mounting surface.
4).
Drill two holes through the template to accommodate #8 pan or round head mounting
screws. Drill one 3/8 inch hole to accommodate the electrical supply wires.
5).
Attach supply connections to the light, making sure to wire in accordance with both
A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical
Systems (33 CFR 183)*.
6).
Mount the base in accordance with the template.
7).
Make sure the light is vertical during operation.
8).
Relamp only with bulb type as marked on globe or inside fixture. For Fig. 0120SWB &
1301 12 volt, use bulbs (PERKO Cat. No. 0337012DP 12V, 11W), and for 0170SWB
24 Volt series lights, use bulbs (Perko Cat. No. 0337014DP 24V, 15W).
*The above referenced standards can be obtained from:
(1).
American Boat & Yacht Council, Inc.(2). U.S. Coast Guard
3069 Solomon’s Island Road
Washington, D.C. 20593
Edgewater, Maryland 21037
(or your local C.G. Office)
PERKO, INC.
12/08
16490 N.W. 13th Avenue
0120INS3
Miami, FL 33169-5707
www.perko.com
MOUNTING TEMPLATE
Cat Nos.
0120SWBDP1
0120SWB12V
0170SWBDP2
0170SWB24V
1301DP0CHR
1301000CHR
USCG APPROVAL
33 CFR 183.810
Visibility: 2nm
Tested By: IMANNA Labs.
Dates: 4/25/03 & 8/15/03
Meets ABYC A-16
Cat. No. 0120SWB Series White All-Round (Anchor) Lights (12 Volt)
Cat. No. 0170SWB Series White All-Round (Anchor) Lights (24 Volt)
Cat. No. 1301SWB Series White All-Round (Anchor) Lights (12 Volt)
The above lights are designed for use on sail or power driven vessels under 20
meters (65.6 ft.) in length operating on a nominal 12 or 24 volt system as indicated. In
order to comply with ‘72 COLREGS and the U.S. Inland Navigation Rules, the following
must be adhered to:
MOUNTING INFORMATION
Read all instructions before proceeding.
1).
For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-
16*, the ‘72 COLREGS*, and the U.S. Inland Navigation Rules*.
2).
These lights are designed to be mounted on a horizontal surface. Horizontal rotation
of these lights is unimportant, as all-round lights have 360° horizontal arc of visibility
3).
Cut out the template below. Tape it to the mounting surface.
4).
Drill two holes through the template to accommodate #8 pan or round head mounting
screws. Drill one 3/8 inch hole to accommodate the electrical supply wires.
5).
Attach supply connections to the light, making sure to wire in accordance with both
A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical
Systems (33 CFR 183)*.
6).
Mount the base in accordance with the template.
7).
Make sure the light is vertical during operation.
8).
Relamp only with bulb type as marked on globe or inside fixture. For Fig. 0120SWB &
1301 12 volt, use bulbs (PERKO Cat. No. 0337012DP 12V, 11W), and for 0170SWB
24 Volt series lights, use bulbs (Perko Cat. No. 0337014DP 24V, 15W).
*The above referenced standards can be obtained from:
(1).
American Boat & Yacht Council, Inc.(2). U.S. Coast Guard
3069 Solomon’s Island Road
Washington, D.C. 20593
Edgewater, Maryland 21037
(or your local C.G. Office)
PERKO, INC.
12/08
16490 N.W. 13th Avenue
0120INS3
Miami, FL 33169-5707
www.perko.com
MOUNTING TEMPLATE
Cat Nos.
0120SWBDP1
0120SWB12V
0170SWBDP2
0170SWB24V
1301DP0CHR
1301000CHR
USCG APPROVAL
33 CFR 183.810
Visibility: 2nm
Tested By: IMANNA Labs.
Dates: 4/25/03 & 8/15/03
Meets ABYC A-16