PERKO 1048 - Manual

Cat. No. 1048 Series Bases
MOUNTING INFORMATION
Read all instructions before proceeding.
1). For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-16*, the
'72 COLREGS*, and the U.S. Inland Rules*.
2). These bases are designed to be mounted on a horizontal surface.
3). Place a mark at the center of the selected mounting location.
4). Cut out the mounting template. Place it on the mounting surface such that the reference mark
(drawn above) is directly underneath the center of the template.
5). Drill indicated holes through the template to accommodate #8 oval head mounting screws and
socket as required.
6). Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C.
Standard E-9* and the U.S. Coast Guard Safety Standards for Boat Electrical Systems
(33 CFR 183)*.
7). Mount the base in accordance with the template.
8). Setup for Operation: As pole engages with base, make sure alignment screw in pole slides into
the notch in the base. Push pole until it engages the electrical connector and turn the collar
clockwise until it threads into place and is snug onto the base.
* The above referenced standards can be obtained from:
(1) American Boat & Yacht Council, Inc. (2) U.S. Coast Guard
613 Third Street, Suite 10 Washington D.C. 20593
Annapolis, MD 21403 (or your local C.G. Office)
PERKO, Inc.
16490 N.W. 13th Avenue
Miami, FL 33169-5707
www.perko.com
12/08
1048INS1
MOUNTING TEMPLATE
5° Rake
Cat. Nos.
1048P00CHR
1048P00DP
CUT ALONG BROKEN LINE
Cat. No. 1048 Series Bases
MOUNTING INFORMATION
Read all instructions before proceeding.
1). For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-16*, the
'72 COLREGS*, and the U.S. Inland Rules*.
2). These bases are designed to be mounted on a horizontal surface.
3). Place a mark at the center of the selected mounting location.
4). Cut out the mounting template. Place it on the mounting surface such that the reference mark
(drawn above) is directly underneath the center of the template.
5). Drill indicated holes through the template to accommodate #8 oval head mounting screws and
socket as required.
6). Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C.
Standard E-9* and the U.S. Coast Guard Safety Standards for Boat Electrical Systems
(33 CFR 183)*.
7). Mount the base in accordance with the template.
8). Setup for Operation: As pole engages with base, make sure alignment screw in pole slides into
the notch in the base. Push pole until it engages the electrical connector and turn the collar
clockwise until it threads into place and is snug onto the base.
* The above referenced standards can be obtained from:
(1) American Boat & Yacht Council, Inc. (2) U.S. Coast Guard
613 Third Street, Suite 10 Washington D.C. 20593
Annapolis, MD 21403 (or your local C.G. Office)
PERKO, Inc.
16490 N.W. 13th Avenue
Miami, FL 33169-5707
www.perko.com
12/08
1048INS1
MOUNTING TEMPLATE
5° Rake
Cat. Nos.
1048P00CHR
1048P00DP
CUT ALONG BROKEN LINE