PERKO 0200MAB User Manual
Bill of material, Visibility and lamp specifications, Table 2
Quantity
Item
Component #
Description
0200TAB 0200MAB 0200GRB
1
151C005
BASE, MOLDING
1
1
1
2
A151C040
LENS, ASSY., TRI-COLOR
1
A151C041
LENS, ASSY., MASTHEAD
1
A151C040
LENS, ASSY., GRN/RED
1
3
6062-001
GLAND
1
1
1
4
151B007
CLAMP
1
1
1
5
6061-001
O-RING
1
1
1
6
151C017
BULB HOLDER
1
1
1
7
A151B046
SUPPORT ROD ASSY., L.H.
1
1
1
8
151C047
BULB HOLDER SUPPORT, UPPER
1
1
1
9
A151C048
BULB HLODER ASSY., UPPER
1
1
1
10
151B008
PLATE, BULB SUPPORT
1
1
1
11
6016-006
SCREW #6 X 1/2” L, P.H. PHILLIPS
4
4
4
12
6016-002
SCREW #4 X 1/4” L, P.H. PHILLIPS
4
4
4
13
A151B012
CONTACT ASSY., BULB
2
2
2
14
A151B050
SUPPORT ROD ASSY., R.H.
1
1
1
*15
See Table 2
BULB
1
1
1
*16
See Table 2
BULB
1
1
1
BILL OF MATERIAL
16490 N.W. 13th Avenue
Miami, FL 33169-5707
Scale: None
Date: 2/18/87
Revised: 12/7/04
Drawn By: R. Levy
0200 SERIES BASE MOUNT (DUAL TIER)
NAVIGATION LIGHT ASSEMBLIES
Drawing
Visibility
Bulb Cat. No.
Number
Model
Description
Weight
Lens/Color
Arc
Miles Watts
12V
24V
32V
A151C045 0200GRB
Green/Red Light
All-Round - Green (A) 360°
All-Round - Red (B)
360°
A151C043 0200TAB
Tri-Color/White
13 oz.
Starboard -Green (A) 112.5°
All-Round Base Light
Port - Red (A)
112.5°
2
25
037512V25W
037524V25W 037532V25W
Stern - White (A)
135°
All-Round White (A)
360°
2
10
037512V10W
037524V10W 037532V10W
A151C044 0200MAB
Masthead/White
14 oz.
Masthead - White (A)
225°
3
25
037512V25W
037524V25W 037532V25W
All-Round Base Light
All-Round - White (B)
360°
2
10
037512V10W
037524V10W 037532V10W
* To select the correct bulb catalog number, proceed as follows:
1.
Find the model number on table #2.
2.
Select the bulb catalog number under the proper voltage. Select 12, 24 or 32 volt options.
Example: Bulb for 0200MAB, 32 volts -
Item 15 = 037532V25W
Item 16 = 037532V10W
These Navigation Lights meet A.B.Y.C. requirements and are designed to meet the 1972 COLREGS, and U.S. Inland Navigation
Rules Act of 1980.
Wiring to be done in accordance with both A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for boat electrical sys-
tems (33 CFR)** or electrical standards required by other appropriate authorities. Minimum #16 gauge wire recommended.
** The above referenced Standards can be obtained from:
(1).
American Boat & Yacht Council, Inc.
613 Third Street, Suite 10
Annapolis, MD 21403
(2).
U.S. Coast Guard
Washington, D.C. 20593
(or your local C.G. Office)
VISIBILITY AND LAMP SPECIFICATIONS
Table 2
0200INS7 - 11/06
Table 1
Light
Visibility
0200GRB
2nm/2nm
0200MAB
3nm/2nm
0200TAB*
2nm/2nm
The above lights are all
approved for 12V, 24V or
32V applications except
where noted.
* Not Yet Approved for
32V Applications
USCG APPROVAL
33 CFR 183.810
Visibility: Varies
Tested By: IMANNA Labs.
Dates: 2/26/03, 6/18/03
and 8/15/03
Meets ABYC A-16