beautypg.com

PERKO 0170WTW User Manual

PERKO Lighting

background image

Fig. 1

Fig. 2

1. Masthead

White

2. Port

Red

3. Starboard

Green

4. Stern

White

5. Bi-Color

Red/Green

6. Towing

Yellow

63 5MM

(2.5 Inch)

Center

5MM

Diamter

Screws

Cat. No. 0170 Series Navigation Lights

For use on sail or power driven vessels under 20 meters (65.6 ft.) in
length. Note: The Bi-Color lights are certified for A-16 Replacement
Use ONLY on vessels built prior to 11/1/03.

Mounting:
A). Consider the location of the light to give:

i) Correct positioning of the light on the boat and
ii) The most convenient positions for cleaning and bulb changing.

B). Mount the red (port) and green (starboard) sidelights accurately

vertical in the same thwartship plane and at the same height
above the waterline at least one meter below the masthead light.

Installation Instructions
A). Unscrew and remove lens assembly.
B). Pierce gasket in base assembly and thread cables through.
C). Mount base assembly using only round head or pan head screws

(screw diameter 5mm or No. 10 wood screw) DO NOT use
counter sunk screws.

D). Place silicone sleeves over cables.
E). Strip cable ends and connect under clamping washers ensuring

they lie clear of the bulb.

F). Locate the lens assembly on the base. Tighten mounting screw.

Electrical Connections
Always use cable of sufficent size to ensure total voltage drop is less
than 0.5 volt for a nominal 12 volt installation or 1 volt for a nominal 24
volt installation. Recommended minimum cable size 1.5mm

2

(No.16AWG).

Bulbs
12V 10W cylindrical PERKO Cat. No. 0069DP0CLR (Stern & Towing).
12V 15W cylindrical PERKO Cat. No. 0070DP1CLR (Side, Bi, Mast).
24V 10W cylindrical PERKO Cat. No. 0067DP1CLR (Stern & Towing).
24V 18W cylindrical PERKO Cat. No. 0067DP2CLR (Side, Bi-Color
and Masthead Lights).

Cleaning
Use only fresh water and mild detergents to clean.

12/08
0170INS1

PERKO, INC.
16490 N.W. 13th Avenue
Miami, FL 33164-5707
www.perko.com

USCG APPROVAL

33 CFR 183.810

Visibility: Multiple

Tested By: IMANNA Labs.

Date: Varies

Meets ABYC A-16

0170 Series Certifications

12V 24V

Light

Color

Visibility Test Date Test Date

Masthead (_M)

White

3nm

1/24/03

9/25/03

Port (_P)

Red

2nm

8/28/03

5/30/03

Starboard (_SD) Green

2nm

8/28/03

5/30/03

Stern (_SN)

White

2nm

1/24/03

5/30/03

Towing (_TW)

Yellow

2nm

11/4/03

10/14/03

Fig. 1

Fig. 2

1. Masthead

White

2. Port

Red

3. Starboard

Green

4. Stern

White

5. Bi-Color

Red/Green

6. Towing

Yellow

63 5MM

(2.5 Inch)

Center

5MM

Diamter

Screws

Cat. No. 0170 Series Navigation Lights

For use on sail or power driven vessels under 20 meters (65.6 ft.) in
length. Note: The Bi-Color lights are certified for A-16 Replacement
Use ONLY on vessels built prior to 11/1/03.

Mounting:
A). Consider the location of the light to give:

i) Correct positioning of the light on the boat and
ii) The most convenient positions for cleaning and bulb changing.

B). Mount the red (port) and green (starboard) sidelights accurately

vertical in the same thwartship plane and at the same height
above the waterline at least one meter below the masthead light.

Installation Instructions
A). Unscrew and remove lens assembly.
B). Pierce gasket in base assembly and thread cables through.
C). Mount base assembly using only round head or pan head screws

(screw diameter 5mm or No. 10 wood screw) DO NOT use
counter sunk screws.

D). Place silicone sleeves over cables.
E). Strip cable ends and connect under clamping washers ensuring

they lie clear of the bulb.

F). Locate the lens assembly on the base. Tighten mounting screw.

Electrical Connections
Always use cable of sufficent size to ensure total voltage drop is less
than 0.5 volt for a nominal 12 volt installation or 1 volt for a nominal 24
volt installation. Recommended minimum cable size 1.5mm

2

(No.16AWG).

Bulbs
12V 10W cylindrical PERKO Cat. No. 0069DP0CLR (Stern & Towing).
12V 15W cylindrical PERKO Cat. No. 0070DP1CLR (Side, Bi, Mast).
24V 10W cylindrical PERKO Cat. No. 0067DP1CLR (Stern & Towing).
24V 18W cylindrical PERKO Cat. No. 0067DP2CLR (Side, Bi-Color
and Masthead Lights).

Cleaning
Use only fresh water and mild detergents to clean.

12/08
0170INS1

PERKO, INC.
16490 N.W. 13th Avenue
Miami, FL 33164-5707
www.perko.com

USCG APPROVAL

33 CFR 183.810

Visibility: Multiple

Tested By: IMANNA Labs.

Date: Varies

Meets ABYC A-16

0170 Series Certifications

12V 24V

Light

Color

Visibility Test Date Test Date

Masthead (_M)

White

3nm

1/24/03

9/25/03

Port (_P)

Red

2nm

8/28/03

5/30/03

Starboard (_SD) Green

2nm

8/28/03

5/30/03

Stern (_SN)

White

2nm

1/24/03

5/30/03

Towing (_TW)

Yellow

2nm

11/4/03

10/14/03