beautypg.com

PERKO 1607 User Manual

PERKO Lighting

background image

Cat. No. 1607 Series White All-Round Lights

The above lights are designed for use on power driven vessels
under 20 meters (65.6 ft.) in length operating on a nominal 12
volt system. In order to comply with ‘72 COLREGS and the U.S.
Inland Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding.

1). For proper light selection, positioning and configuration, refer to A.B.Y.C.

Standard A-16*, the ‘72 COLREGS*, and the U.S. Inland Rules*.

2).

These lights are designed to be mounted on horizontal tubing or rails 3/4” to
1-1/2” diameter.

3). Horizontal rotation of these lights is unimportant, as all-round lights have 360°

horizontal arc of visibility.

4). Using the base or the plastic mounting insulator as a template, place it on the

mounting surface such that the globe can be adjusted to a vertical position when
mounted.

5).

Drill mounting holes for #8 round or panhead screws (Not Supplied).

6). Attach supply connections to the light, making sure to wire in accordance with

both A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat
Electrical Systems (33 CFR 183)*.

7).

Mount the light. A self adhesive insert is provided to securely mount the light to
1-1/4” and 1-1/2” rails.

8).

Adjust pole such that the globe is in a vertical position during operation, in order
to assure compliance with the technical details of the regulations and employ the
“Reduced Glare” feature.

9).

Relamp only with bulb type as marked on globe or inside fixture. Use ANSI #906
bulbs (PERKO Cat. No. 0338DP2CLR 12V, 9W).

*The above referenced standards can be obtained from:

(1). American Boat & Yacht Council, Inc.

(2). U.S. Coast Guard

613 Third Street, Suite 10

Washington, D.C. 20593

Annapolis, MD 21403

(or your local C.G. Office)

PERKO, INC.

12/08

16490 N.W. 13th Avenue

1607INS1

Miami, FL 33169-5707
www.perko.com

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Tested By: IMANNA Labs.

Date: 4/25/03

Meets ABYC A-16

Cat. No. 1607 Series White All-Round Lights

The above lights are designed for use on power driven vessels
under 20 meters (65.6 ft.) in length operating on a nominal 12
volt system. In order to comply with ‘72 COLREGS and the U.S.
Inland Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding.

1). For proper light selection, positioning and configuration, refer to A.B.Y.C.

Standard A-16*, the ‘72 COLREGS*, and the U.S. Inland Rules*.

2).

These lights are designed to be mounted on horizontal tubing or rails 3/4” to
1-1/2” diameter.

3). Horizontal rotation of these lights is unimportant, as all-round lights have 360°

horizontal arc of visibility.

4). Using the base or the plastic mounting insulator as a template, place it on the

mounting surface such that the globe can be adjusted to a vertical position when
mounted.

5).

Drill mounting holes for #8 round or panhead screws (Not Supplied).

6). Attach supply connections to the light, making sure to wire in accordance with

both A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat
Electrical Systems (33 CFR 183)*.

7).

Mount the light. A self adhesive insert is provided to securely mount the light to
1-1/4” and 1-1/2” rails.

8).

Adjust pole such that the globe is in a vertical position during operation, in order
to assure compliance with the technical details of the regulations and employ the
“Reduced Glare” feature.

9).

Relamp only with bulb type as marked on globe or inside fixture. Use ANSI #906
bulbs (PERKO Cat. No. 0338DP2CLR 12V, 9W).

*The above referenced standards can be obtained from:

(1). American Boat & Yacht Council, Inc.

(2). U.S. Coast Guard

613 Third Street, Suite 10

Washington, D.C. 20593

Annapolis, MD 21403

(or your local C.G. Office)

PERKO, INC.

12/08

16490 N.W. 13th Avenue

1607INS1

Miami, FL 33169-5707
www.perko.com

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Tested By: IMANNA Labs.

Date: 4/25/03

Meets ABYC A-16