DoorKing 1808 Telephone Access Plus - Manual (Page 33)

1810-162-J-1-12 Page 33
2.2 Programming Methods
Access Plus units can be programmed from a computer, the unit’s keypad or from a touch-tone
telephone connected to the unit. We highly recommend programming the Access Plus unit from a
computer using the Access Plus Account Manager software as this greatly simplifies the
programming task. There are also several features in the Access Plus unit that must be setup using
a computer.
The following features and programming parameters can only be programmed from a computer.
Strike Out: This feature can be turned ON or OFF and will set the number of invalid access
codes allowed before the system shuts down for a period of time. The default is OFF.
Holiday Schedules: Program up to 31 different Holiday schedules. This feature can be turned
ON or OFF. The default is OFF.
Email Notification: Set the Access Plus unit to send emails to a specified email address on
events of your choice - requires an Internet connection. This feature can be turned ON or OFF.
The default is OFF.
Transaction Log: Download and view the system transaction log.
 Computer (PC’s only)
This is the preferred method of programming the Access Plus unit as it will simplify all of the
programming steps and allow you to enjoy all of the features and benefits available with this
system. The Access Plus Account Manager software must be installed on your computer
and the Access Plus unit must be connected to the computer via one of the methods shown
in section 1.9.2 or 1.9.3. Refer to the software help screens for more information.
 Keypad
We strongly recommend that you become familiar with the entire programming sequence
before attempting to program some of the more complex features of the Access Plus unit
using the unit’s keypad. If you make a single error in the programming steps, you will have to
re-do the sequence from the beginning.
 Touch-Tone Telephone
The programmable features that can be programmed using the unit’s keypad can also be
programmed using a touch-tone telephone from any outside phone line by calling into the
Access Plus unit. This method of programming is useful for programming simple steps or for
turning certain features ON or OFF, but is not recommended for complex programming steps.