beautypg.com

Actuator rebuild, Actuator disassembly, Clean components – Magnum Venus Plastech Classic Pro Gun CPC_CPG_CPW_CPP User Manual

Page 31

background image

Classic Pro Gun Manual

Rev. 08/2012

Page | 31

Actuator Rebuild:


Actuator Disassembly

1.

Remove the two o-rings (O-V-013) from the underside of the cylinder body
(58631-1).

2.

Unscrew the cylinder caps (5106-4-1) from each end of the cylinder body.

3.

Remove the o-ring (O-V-020) from each of the cylinder caps

4.

Remove the actuating piston (5106-7-1) by pushing it out the back end (long end)
of the cylinder body with your fingers or a blunt tool.

5.

Remove the actuating bushing (5106-5-1) from the piston with the packing
assembly rod.

CAUTION: Avoid damaging the actuating piston when using the scribe in the
next step.

6.

Use a scribe to remove the o-ring (O-V-020) from the actuating piston.

Note: O-rings should be replaced each time the gun is disassembled.

Clean Components

Discard the used o-rings

Clean the cylinder assembly components with solvent and allow to air dry. Do

not soak actuating piston or cylinder caps in solvent as they will swell.