Magnum Venus Plastech Classic Pro Gun CPC_CPG_CPW_CPP - Manual (Page 18)

Classic Pro Gun Manual
Rev. 08/2012 Page | 18
Remove Hoses
Note: Although previous steps should have removed all pressure from the lines,
there may still be trapped fluids under pressure in the lines. Read the
recommended safety procedures below.
WARNING: Wear appropriate eye protection. Pressurized fluids may cause eye
injuries.
WARNING: When removing hoses from fittings, wrap a large rag or shop towel
around the wrench and fitting as you remove the fitting. Remove fitting slowly to
allow any pressurized fluid to escape into the rag or towel.
1. Wrap a large rag or shop towel around the resin fitting and a wrench.
2. Use the wrench to loosen the fitting slowly until you can remove the resin hose
from the fitting.
3.
Use this technique to remove the solvent hose, and the catalyst hose.