Magnum Venus Plastech Classic Pro Gun CPC_CPG_CPW_CPP - Manual (Page 30)

Classic Pro Gun Manual
Rev. 08/2012 Page | 30
Mix Housing Options

Standard Mix Housing (5104-20-1) – Use with all turbulent mixers and most
applications.

FIT Mix Housing (VPG-1001)
– Use with FIT style spray tips. Uses mixer
VPG-1003.

FIT Low Flow Mix Housing (VPG-1001-1/4)
– replacement mixer TRT-1018-1/4

Ratio Block – Pail Dispenser Mix Housing (58735-1) – separates material
streams.
Distribution Ring Selection
There are three different distribution rings and they are as follows:

Standard Distribution Ring 5104-17-1 (58607-1) – Used for most applications
where outputs are not critical.

Filled Resin Distribution Ring 5104-18-1 (58701-1)
– Used in application
where the resin is filled above 20 percent. Use with high filler loads and high
outputs.

Critical Mix Distribution Ring 5104-19-1 (58703-1) – Use in low output
application, where it is important to restrict flow.
Turbulent Mixer Selection
There are two different turbulent mixers, in two different materials.

Standard Turbulent Mixer 5107-27-3 – Use for most applications where
outputs are not critical. Use with chopper and saturator applications.

Glass Filled Special Turbulent Mixer 5107-27-4
– Use with abrasive materials
and filled resin applications where durability is required.

Critical Mix Turbulent Mixer 5107-27-2
– Use for low output applications such
as gel coat. In low flow application the critical mix turbulent mixer will work
best.

Glass Filled Critical Mix Turbulent Mixer 5107-27-5 – Use in low flow
applications where the material is abrasive and durability is required.