beautypg.com

Gun block assembly, Clean block assembly, Install secondary seals – Magnum Venus Plastech Classic Pro Gun CPC_CPG_CPW_CPP User Manual

Page 24: Reinstall center spacer

background image

Classic Pro Gun Manual

Rev. 08/2012

Page | 24

Gun Block Assembly:


Clean Block Assembly

Discard o-rings and seals.

Clean remaining components with solvent and allow to air dry.

You have now disassembled the gun block.

Install Secondary Seals

1.

Place one of the secondary seals (5104-3-1) into the center of the gun block
where the center spacer goes. Gently push the secondary seal into position with
something flat, flush with the gun block. Use caution not to damage it the seal.

2.

Repeat the process for the other secondary seal.



Secondary Seals











Center Spacer



Reinstall Center Spacer

1.

Place the center spacer (5104-10-1) in the gun block, making sure that the center
spacer is aligned as accurately as possible with the slot facing up. Use caution
not to damage the secondary seals, already installed