Laurel Electronics LAUREATE SERIES COUNTER_TIMER - Manual (Page 18)

-16-
DIGIT SELECT KEY VALUE SELECT KEY MENU KEY
0 Unfiltered peak value
1 Filtered peak value
0 Low adaptive threshold
1 High adaptive threshold
0 No filter
1 0.1 sec
2 0.2 sec
3 0.4 sec
4 0.8 sec
5 1.6 sec
6 3.2 sec
7 6.4 sec
0 Positive slope
1 Negative slope
0 Positive slope
1 Negative slope
Use value select key to se-
lect decimal point
Use value select key to se-
lect decimal point
Select 0 through 9 for
flashing digit. Decimal point
fixed. Select scale factor
multiplier
Select 0 through 9 for
flashing digit. Decimal point
fixed by DecPt1.
Select 0 through 9 for
flashing digit. Decimal point
fixed by input range on V-F
Select 0 through 9 for
flashing digit. Decimal point
fixed by DecPt1.
Select 0 through 9 for
flashing digit. Decimal point
fixed by input range on V-F
00000
Peak value
00000
Adaptive filter threshold
00000
Filter time constant
00
Channel A input
00
Channel B input
1.11111 11.1111 111.111
1111.11 11111.1 111111.
2.22222 22.2222 222.222
2222.22 22222.2 222222.
0.00000 0.00000 0.00000
0.00000 0.00000 0.00000
Scale factor
0.00001 to 100000 Multiplier
0000.00 0000.00 0000.00
0000.00 0000.00 0000.00
0.00000 0.00000 0.00000
0.00000 0.00000 0.00000
0000.00 0000.00 0000.00
0000.00 0000.00 0000.00
0.00000 0.00000 0.00000
0.00000 0.00000 0.00000
FiLtEr
Filtering (continued)
SLOPE
Trigger slope of input signal
(if not V-to-F)
dEc.Pt1
Decimal point selection
dEc.Pt2
Decimal point selection
SCALE1
Scale factor and multiplier
(Scale and Offset selected)
OFFSt1
Offset or Zero Value
Lo in1
Low signal input value (Coor-
dinates of 2 points selected)
Lo rd1
Low Displayed Reading at
Low Signal Input
Hi in1
High signal input value