Controlled Products Systems Group 1150-080 - Manual (Page 27)

1150-065-F-1-11 25
4.4 Accessories
The following accessory items are available for the model 1150 overhead gate operator.
Contact Sensors - For use as a secondary entrapment protection device.
Miller Edge, Inc., ME120, ME123, MGO20, MGR20, MGS20.
Photo Cell - Non-contact (photo-cells) sensors for use as a secondary entrapment protection device.
P/N 8080-010 – Infrared thru-beam, 165 foot sensing distance.
P/N 8080-011 – Photo-reflective beam, 30 foot sensing distance.
P/N 8080-031 – Infrared thru-beam, 65 foot sensing distance.
P/N 8080-031 – Polarized photo-reflective, 35 foot sensing distance.
Loop Detector - Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9410-010 - Single channel detector
P/N 9409-010 - Dual channel detector
Loop Wire - 18 AWG loop wire with XLPE insulation is ideal for ground loops. Available in 500 and 1000 foot rolls with red, blue
or black insulation.
Pre-Fab Loops - Prefabricated ground loops. 24-foot circumference with 50-foot lead-in. Available in yellow, red or blue jackets.
Not for use in asphalt roadways.
Control Station - Three button interior and exterior control stations provide manual open-close-stop gate operation.
P/N 1200-006 – Exterior / Interior
P/N 1200-007 - Interior
Time Clock - 7 day and 365 day time clocks can be used to automatically open gate at pre-set time and days. Compact clock fits
inside the operator.
P/N 2600-791 - 7 day clock
P/N 2600-795 - 365 day clock
Surge Devices - High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and
power surges.
P/N 1876-010 - High Voltage
P/N 1878-010 - Low Voltage
Gate Scale - Use to test torque required to move gate. P/N 2600-225
Speed Bumps - Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150