CTI Products EXB-IP Ethernet System Extender - Manual (Page 45)

CTI Products, Inc. EXB-IP User Guide
Appendix C - Connector Details 45
10BaseT Ethernet Connector
Connector type: Standard RJ45 female.
Pin Function
1 Ethernet TX
2 Ethernet TX
3 Ethernet RX
4 N/C
5 N/C
6 Ethernet RX
7 N/C
8 N/C
ASYNC Connector
When this port is connected to a PCs serial port, the EXB-IP Config program can be used to configure the IP
address parameters.
Connector type: Standard D-Subminiature 9 pin male. DTE (Like IBM PC 9 pin)
Null Modem cable (CTI # 89-11314) required for connection to
PC.
Pin Function
1 Data Carrier Detect
2 RX
3 TX
4 Data Terminal Ready
5 Signal Ground
6 Data Set Ready
7 Clear to Send
8 Request to Send
9 N/C