Status monitoring, Status monitoring -45 – CONTREX ML-Drive User Manual
Page 79
3 - 45
Status Monitoring
These MPs monitor the status of the ML-Drive's modes of operation and operating
states.
MP-50 ACTIVE SCALING MODE
The digit that displays a number “1” is the active Scaling mode. In the example below,
“Master Mode” is the active Scaling mode.
Direct Mode
Master Mode
Follower Mode
Inverse
Code
MP-51 KEYPAD ERROR
If a Control Parameter entry has been rejected, Keypad Errors (MP-51) will ascertain
the reason that it was rejected. The digit that displays a number “1” is the error. In the
example below, “Above Maximum Allowed Value” is the error.
Invalid Code Parameter
Above Maximum Allowed Value
Below Minimum Allowed Value
Entry Timeout or Keypad Lockout
Code