CNB RBDS4848 - Manual (Page 85)

85
BDx-Series Installation & User ’s Manual
Frame by event
Frame can be set by each event detection.
Set time for pre-alarm recording
Recording speed, transmission speed, recording
video quality and transmission video quality for
post-alarm recording can be set.
6.2.3 Recording setup
1) Resolution
Set the resolution among SIF, VD1 and FD1.
Set horizontal resolution from 352 to 704 while vertical size will
automatically set.
2) Recording speed (fps)
Set recording frame per second. Maximum frame differs by capture speed.
3) Transmission speed (fps)
Set transmission frame per second. Maximum frame differs by capture speed
4) Recording video quality
Video quality can be set among ‘low’, ‘normal’, ‘high’ and ‘max’. In ‘low’ setting, size of recording data will get
smaller while video quality get poorer. In ‘max’ setting, size of recording data will get bigger while video quality
get the best.
5) Transmitting video quality
Set video quality to transmit to CMS. If you set ‘low’, you can transmit at higher speed. With the better quality
and lower speed, you can get the similar result.
6) Sensitivity
Decide encoding method by recognizing changes in video recording. The lower, the more responsive and the
default is 10.