CNB RBDS4848 - Manual (Page 69)

69
BDx-Series Installation & User ’s Manual
You can check and confirm the current operating status by the icons on left/right top.
It indicates recording / playback status.
It indicates channel number
It indicates camera name, which is set in setup -> camera.
It indicates emergency recording status.
It indicates motion detection recording status. When there is any change in the area set in
setup -> motion detection, it records if motion detection recording is set in setup -> recording
schedule.
It indicates continuous recording. Continuous recording is set in setup -> recording schedule.
It indicates audio status if set ‘use’ in setup -> camera. If you click icon, audio is activated.
It indicates PTZ status set in setup -> camera. If you click icon, use of PTZ is activated.
It indicates sensor recording if set sensor recording on in setup -> recording schedule.
It indicates trespass/stealth detection, activated by check on in setup -> recording schedule
-> trespass/stealth.
Login should be done to use program.
You can use program by clicking login after inputting ID and password.
You are expected to change password in setup -> user in first login
Factory default ID and password are as follows:
[ Version 3 : ID - admin password - 1111 ]