CNB RBDS4848 - Manual (Page 82)

82
BDx-Series Installation & User ’s Manual
6.2.2 Functions by camera
1) Running camera
Decide whether camera is on or off.
2) Camera name
Decide camera name. (Max. 32bytes)
3) PTZ
In case camera support PTZ function, you click on to setup PTZ such as connection info, preset,
speed and reverse action.
① Current video info Show input video of current camera
② Connection info Show connection info (model, protocol, COM port, connecting speed, Rx address and
status)
③ Speed Control speed of Pan, Tilt, Zoom and Focus
④ Reverse action Reverse acting direction of Pan Left/Right, Tilt Up/Down, Zoom In/Out, Focus
Far/Near
⑤ Pattern Pattern function that speed dome supports.
⑥ Group Grouping function that speed dome supports.
⑦ PTZ control To setup preset. After you move PTZ camera to the requested location, check the
preset number.