CNB RBDS4848 - Manual (Page 33)

33
BDx-Series Installation & User ’s Manual
To set audio each selected camera. Appear selecting camera number in “[__] Audio #1”.
< The detail configuration refer to setup of software user manaul.>
2.3 Installing Device Driver
Install the board in the PC, and boot the PC. Then, the PC will automatically detect the board (by PNP) and will
be ready to install the driver. The user can easily install the driver file saved in the installation diskette or HDD by
designating the folder classified according to the OS type.
After the driver file is installed, the IRQ of the
installed card must not conflict or be shared with another card or equipment. However, if the IRQ
of the installed card is shared by another card or equipment, insert the card into a different PCI slot
or manually specify the IRQ through CMOS setup of the main board.
Operating systems supporting the driver include Windows98SE, Windows 2000, and windows XP .
Manufacturer guarantees the compatibility only with ATI-series video cards , not other video
cards.
Install the driver as described below:
2.3.1 BDF0303m / BDF0303 / BDS0606 / BDS1212 Driver
2.3.1.1 Windows XP/2000
Turn off the PC, and insert the board in the PCI slot. Turn on the PC, and run the system.
Windows XP/2000 will automatically detect the new hardware device and recognize it as a multimedia video
controller.