Hach-Lange ORBISPHERE K1100_M1100 Operator Manual - Manual (Page 89)

87
Section 10 Security Menu
Note: When the instrument is started for the very first time, security is disabled by default. It is highly
recommended that each user be entered into the system and given appropriate access rights as soon as
possible to avoid any unauthorized access. Details of this process are described in this section.
10.1 Access rights management
Note: At startup, all the menus are locked. The user has to identify himself to get access beyond the
different views (see Function keys on the header bar on page 42 ).
Figure 42 Security menu
Access rights management
Each user has a unique ID and user password. The ID and password are used by the software to:
•
Allow or deny a user to perform specific actions.
• To trace this action with his "ID" in a log file.
Once the ID and password are entered, the user is allowed to perform actions according to the "Access
level" that has been attributed to his ID by the Manager. See
Security level table on page 17 .
Table 3 Access levels
Level Typical rights Comments
0 View parameters, change views Press the unlock button and OK to access
1 + Start / Stop measurements
2 + Calibration
3 + Modify parameters
4
+ Modify table "User ÅÆ Access level"
+ Enable/Disable "Access right" features
There is at least one ID having the level 4