Burkert Type 8032 - Manual (Page 22)

ENGLISH ENGLISH
remote flow rate controller 8032
.1 General recommendations
Keep in mind that the process may be influenced by all the parameter
settings you make� Fill-in the table on page 28 with your settings of the
controller�
.2 functionalities
The device has three operating modes :
normal mode
Display of the measured flow rate and the switching thresholds pro-
grammed� From the Normal mode, you can access the Calibration and
Simulation modes�
calibration mode
Access to the programming of all the parameters (unit, K-factor, calibra-
tion through the „Teach-in“ feature, output, filter, bargraph)� From the
Calibration Mode, you can go back to the Normal Mode�
simulation mode
Entering a theoretical flow rate value to test the configuration program-
med in the Calibration Mode� From the Simulation Mode, you can go
back to the Normal Mode�
ProGramminG