Burkert Type 8032 - Manual (Page 12)

ENGLISH ENGLISH
remote flow rate controller 8032
4 installation
4.1 General recommendations
Always check the chemical compatibility of the materials the controller is
made of with the products it may be in contact with, for instance: alco-
hols, strong or concentrated acids, aldehydes, bases, esters, aliphatics,
aromatics, ketones, aromatics or halogenated hydrocarbons, oxidizing
agents and chlorinated products� For more information, please contact
your Bürkert sales office�
4.2 mounting of the wall-mounted version
1� Select the location of the holder on a wall, then drill 4 holes by res-
pecting the hole-to-hole distances indicated on the opposite schema-
tic and mount the holder using 4 screws�
40 mm
30,5 mm
12 mm
3 mm ø 7,4 mm
ø 4,7 mm