Burkert Type 3005 - Manual (Page 5)

5
Correctuse
3. correct use
incorrect use of the electromotive rotary actuator can be dan-
gerous to people, nearby equipment and the environment.
• The rotary actuator can be used indoors, e.g. to actuate fittings,
especially ball valves or shut-off flaps.
• During use observe the permitted data, the operating condi-
tions and conditions of use specified in the contract documents
and operating instructions, as described in chapter “6. System
Description”.
• The device may be used only in conjunction with third-party devices
and components recommended and authorised by Bürkert.
• Correct transportation, correct storage and installation and careful
use and maintenance are essential for reliable and problem-free
operation.
• Use the device only as intended.
3.1. restrictions
If exporting the system/device, observe any existing restrictions.
4. General safety instructions
These safety instructions do not make allowance for any:
• Contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• Local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
risk of electric shock!
There is a serious risk of injury when reaching into the device.
• Before starting work, always switch off the power supply and
safeguard to prevent re-activation!
• Connect several electromotive rotary actuator always with phase
separation via a switch.
• Protect the device with a mains-operated fuse.
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Danger of explosion!
For specific device designs there is a risk of explosion if the
device is opened in the explosion-protected area.
• Follow the safety instructions on the type label!
Danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged
devices or persons, there is a danger of explosion in the EX area.
english
Type 3005