Burkert Type 3005 - Manual (Page 20)

20
Installation
A C B C G
H
E
F
D
Fig. 17: Power supply circuit board 100-240 V 50/60 Hz
(100-350 V DC)
no. Designation no. Designation
a Screw for earthing e LED 2: Error message
b Connections for control
and power supply f LED 3: Power on
c Fuse G Connection for error feedback
(24 V DC - 3 A max)
D LED 1: Microprocessor OK h Connection 24 V DC
the rotary actuator can be connected and operated in two dif-
ferent modes:
1. Three points mode
2. Open / Closed mode
Auf Zu
N
-
Ph
+
1 2 3
T/E
Fig. 18: Three points mode
N
-
Ph
+
3 2 1
T/E
Fig. 19: Open/Close mode / Emergency current model in the oper-
ating instructions
If voltage is applied simultaneously to terminals 2 and 3,
terminal 2 is the leading one and the actuator moves to the
OPEN position.
procedure:
→
Loosen left cable gland 15 (see “Fig. 1” and “Fig. 2”) and feed
through the cable to be connected.
english
Type 3005