General information, Manufacturer's address and international contacts, Warranty conditions – Burkert Type 8715 User Manual
Page 7: Information on the internet, Description of the system, General description

7
Generalinformation
Type 8710, 8711, 8713, 8715
4.
GenerAl informATion
4.1.
manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
F-67220 TRIEMBACH-AU VAL
The addresses of our international sales offices are available on the
internet at:
www.burkert.com
4.2.
Warranty conditions
The condition governing the legal warranty is the conforming use of
the MFM / MFC in observance of the operating conditions specified
in this manual.
4.3.
information on the internet
You can find the user manuals and technical data sheets regarding the
type MFM / MFC at:
www.burkert.com
5.
DescripTion of The
sysTem
5.1.
General description
• Mass flow meter types MFM 8700, 8701, 8703 and 8705 are
devices designed for measuring the mass flow-rate of clean, dry
gases.
• Mass flow controller types MFC 8710, 8711, 8713 and 8715
are
devices designed for controlling the mass flow-rate of clean, dry
gases.
type of the device
type of sensor
MFM
8700
Capillary/Bypass channel
8701
MEMS
8703
MEMS
8705
Capillary/Bypass channel
MFC
8710
Capillary/Bypass channel
8711
MEMS
8713
MEMS
8715
Capillary/Bypass channel
5.1.1. General operation of the mass flow
meter (mfm)
The MFM integrates a sensor for measuring the flow-rate. The measured
value for the mass flow-rate is transmitted to a remote device via an
analogue or a digital output (field bus).
English