Packaging, storage, transport, Packaging, transport, Storage – Burkert Type 8715 User Manual
Page 48: Returning the device

48
Packaging,Storage,Transport
Type 8700, 8701, 8703, 8705
12.
pAckAGinG, sTorAGe,
TrAnsporT
12.1. packaging, Transport
note
Damage due to transport
Inadequately protected equipment may be damaged during
transport.
• Remove all cables, connections, separate filters and installation
material.
• Clean and air contaminated devices.
• Protect fluid connections from damage by fitting protective caps
and seal.
• Pack the device in two suitable bags, sealed with protective film.
• During transportation protect the device against humidity and
dirt in shock-resistant packaging.
• Do not expose the device to temperatures outside the storage
temperature range.
12.2. storage
note
poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storage temperature: -10 °C to +70 °C.
13.
reTurninG The Device
no work or tests will be carried out on the device until
there is a valid contamination Declaration.
The Contamination Declaration can be downloaded from our
Homepage or requested from your local after-sales service.
www.buerkert.fr Service Servicing/Maintenance/
Commissioning Contamination Declaration
To return a device already in use, a returns number is
required.
If you would like to return a device already in use to Bürkert, proceed
as follows:
→
Complete the Contamination Declaration.
→
Send the declaration to the address indicated on the form:
Bürkert will fax or e-mail you a returns number.
→
Pack the device in consideration of the information in chap. 12.1.
→
Return the device to Bürkert with the Contamination Declaration,
quoting this returns number.
Adress:
Bürkert Fluid Control Systems
Corporate Quality / Complaint Management
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tél. + 49 (0) 7940 - 10 91 599
Fax + 49 (0) 7940 - 10 91 490
E-mail: [email protected]
English