Burkert Type 8709 - Manual (Page 46)

46
Accessories / Spare parts
fluid accessories 10.1.2.
In general, Bürkert offers screw-in connections with imperial screw-in thread only.
The flange plates used therefore, have imperial screw-in threads.
The pipe connection side can be ordered both in metric and imperial sizes.
screw-in thread
in accordance with
DIN ISO 228/1 pipe
Ø Material Order number Order number
Sealing ring
G 1/4 6 mm VA 901 538 901 575
G 1/4 8 mm VA 901 540 901 575
G 1/4 1/4" VA 901 551 901 579
G 1/4 3/8" VA 901 553 901 579
Fluid accessories Table 12:
caution!
A sealing ring must be ordered for each screw joint!
Other accessories for the fluid connection of an LFC / LFM can be found under Type 1013 in the Bürkert
accessories catalogue.
10.1.3. Mass flow communicator (pc software)
The "Mass Flow Communicator" PC program is designed for communication with the devices from the
Mass Flow Controller and Liquid Flow Controller families supplied by Bürkert.
It is used to configure, as well as display and write various parameters.
The program runs on the Windows platform and requires a serial interface (RS 232) for communcation
with the LFC / LFM.
This program can be used to configure different settings on the devices:
Read out information specific to the device •
Change the assignment of binary inputs and outputs •
Change the LED function assignment •
Activate various functions •
Change the dynamic properties •
A detailed description and precise listing of the operation procedure of the "Mass Flow Communicator"
software can be found in the software documentation.
Download the software from: www.burkert.com
english
Type 8718, 8719 / 8708, 8709