Burkert Type 8644 - Manual (Page 29)

29
Structureandfunctionofthemodules
7.2. connection modules
7.2.1. structure of the connection module

Pneumatic feed
Type MP11/MP12 (left, middle, right) Electrical connection module
Type ME02/ME03 (left, right)
Interface to electrical part of
the automation system (field
bus nodes; electrical modules/
terminals)
Shunting
(socket on left, plug on right)
Electrical interface for data shunting
within the Bürkert AirLINE system
Type 8644
Panel
Assembly variant with pressure gauge
Cover plate
Catch hook - Mechanical
attachment for pneumatic base
modules MP11/MP12
X - Pilot control exhaust air
connection, control assist air
connection
(R) 3
Exhaust air connection
(S) 5
Exhaust air connection
(P) 1
Pressure supply connection
Screws
Fastening screws for rail
assembly
Clamps
Fastening clamps for rail
assembly
(P) 1
Pressure supply connection X - Pilot control exhaust
air connection, control
assist air connection
(R) 3 + (S) 5
Figure 9: Structure of the connection module
The connector strip situated under a shielding plate near the pneumatic connection modules is guided by
a protective plastic collar. Placing these modules in rows and connecting them together ensure that this
shielding plate and the plug pins are not damaged or bent.
english
Type 8644