Burkert Type 8643 - Manual (Page 34)

34
Configuring the network
rel. index parameter notation operation
Dynamic
ViEW_1
operation
static ViEW_2
all Dynamic
ViEW_3
other static
ViEW_4
8 SOFTWARE_REVISION
9 HARDWARE_REVISION
10 DEVICE_MAN_ID
11 DEVICE_ID
12 DEVICE_SER_NUM
13 DIANOSIS 4
14 DIANOSIS_EXTENSION
15 DIANOSIS_MASK
16 DIANOSIS_MASK_
EXTENSION
Table 9: Display objects of the physical block
Transducer Block 9.2.2.
Abbreviations:
Storage
n
Non-volatile parameter which must be observed in the operating cycle. However, it does
not belong to the static updating code.
s Static, non-volatile; the version counter ST_REV is increased during the write process.
D (dynamic) The value is calculated in the block or read from another block.
access
r
read access
w write access
transfer type
a
acyclic
cyc cyclic
english
Type 8643 PA