Burkert Type 8631 - Manual (Page 9)

8631 - 7
G
ENERAL
N
OTES
english
Warranty conditions
Scope of delivery
Immediately after receipt of a shipment, make sure that the contents are undamaged and match the
scope of delivery stated on the packing slip. In the event of discrepancies, please contact our service
department immediately:
Bürkert Steuer- und Regelungstechnik, Service Department
Chr.-Bürkert-Str. 13-17, D-76453 Ingelfingen
Tel.: (07940) 10-586 / Fax: (07940) 10-428
eMail: [email protected]
This document contains no warranty promises. We refer in this connection to our General Conditions of
Sale and Business. The condition for the warranty is use of the unit for the intended purpose under the
specified application conditions .
The guarantee only covers faults in the TOP Control on/off series, and in the integrated
pneumatically-driven valve. No liability will, however, be accepted for subsequent
damage of any kind that may arise as a result of the failure or incorrect functioning of
the device.
ATTENTION!
Notes for use in the Ex-area
Please comply with the following:
• In the case of installation and operation in areas that have a risk of explosion, the respective national
regulations. In Germany, this is VDE 0165.
• When making electrical connections to the inherently safe circuit, the information given in the
corresponding conformity certificates.
• Always follow the information contained in the ATEX approval.
• Take suitable measures to avoid an electrostatic discharge from the plastic
parts of the housing (see EN 100 015 - 1).
• No component should be connected to the inputs and outputs of the circuit
board whose electrical data is outside the limits determined for intrinsically safe
operation quoted in the data sheet of the positioner.
• Work out on the device with the housing open should not be carried in very
damp or aggressive atmospheres. Take precautions to exclude unintentional
mechanical damage to the circuit boards or their components. Limit the period
during which the unit is opened to that which is absolutely necessary.
Notes for units with EEx-i approval
Conformity
In accordance with the EC Declaration of conformity, Type 8631 is compliant with the EC Directives.
Standards
Conformity with the EC Directives is verified by the following standards:
EN 60079-0
Warranty