Brooks Instrument 0254 - Manual (Page 94)

C-16
Model 0254
Section C Serial Communications Protocol Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
C-4-4 Global Settings Services
C-4-4-1 Global Setting Values
This command enables a terminal operator or host to acquire the present
state of the Global programmed values. The Global Settings port number
is one greater than the maximum number of available ports, which is 9 for
Model 0254.
HOST SEND
AZ[.09]V Non-Network
AZ[.9] V
AZ[yyyyy.09]V Network
AZ[yyyyy.9]V
RESPONSE
PROGRAM VALUES - Channel Global
<39> Audio Beep On
<32> Zero Supress On
<33> Pwr SP Clear Off
<43> Record Count 000000 (view only) log option
<25> Sample Rate 535 sec log option
<22> Date-Time 00Jan00 00:00:00 log option
<17> Network Addr 00000
C-4-4-2 Set Global Settings Values
Each of the system port programmed operating values can be individually
queried or changed in accordance with the procedures in Section 3 using
the value index.
C-4-5 Communication Message Basics
Messages between host and instrument are either polled (solicited) or un-
polled (un-solicited), where the host is normally the polling (soliciting) party.