Brooks Instrument 0254 - Manual (Page 38)

3-12
Model 0254
Section 3 Operation Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
3-5 Global Settings
Global settings are the various system wide variables used to set up and
review the overall operating characteristics that establish how the entire
instrument will perform. The values include those provided only for viewing,
those that can be selected, and those that invoke immediately action.
3-5-1 Global Information
To access the Global Settings screen, press the BACK/GLOBAL key three
times from the Home screen.
This screen contains system information values and configuration states.
These values are not programmable, with the only exception being the
Factory Set immediate action selection described below, which erases
present programmed values and replaces them with factory default values.
NOTE: The Clk Install, Wan Install, and Lan Install settings are not available for use.
Unit Serial Number
This is a factory-entered manufacturing serial number and does not relate
directly to the device serial number.
Version
This is the date the firmware was last upgraded represented as year,
month, and day, and is only for viewing.