Brooks Instrument 0254 - Manual (Page 54)

3-4
Model 0254
Section 3 Operation Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
Key Present Location System Response
All Screens: Selected Item Move cursor left.
Home Screen Select channel pointed to by cursor as blend master
unless the channel is already the master, in which
case the existing master is deselected and no master
is chosen.
Display Configuration Screen Zero PV Total when cursor points to PV Total.
Program Screen Move blinking program selection to next left choice.
All Screens: Selected Item Move cursor right.
Home Screen HOT navigates to change channel setpoint value.
3-3 Navigation
This subsection provides an overview of the various values that are
available to set up the various program values, which determine how the
instrument is desired to perform. It also describes the performance
operating states.
Navigation is primarily performed using the keypad controls described in
"3-2-1 Primary Functions" on p. 3-2. The same operating characteristics
set using the keypad are also fully supported by serial communication. The
serial communication functions are described more fully in Section D.
A complete map of the user interface screens is provided to support the
overview of the instrument. It shows the entire organization of all of the
instrument process values (PV), all setpoint (SP) values, and all system
global settings.