FlexLink X45 Руководство пользователя - Manual (Page 14)

Safety
6 5113196-2
1.3 Description of safety provisions
Before putting the system into operation some safety provisions are to be
taken care of. The purpose of these safety provisions is to protect the user,
the product and the system against undesired situations (damage). Without
these safety provisions FlexLink cannot give a guarantee on any damage
caused in absence of these safety provisions.
The table below gives a general description of the safety provisions re-
quired. Here it should be noted that only technically qualified employees
are allowed to work on the settings of the safety provisions!
Control Remark
Emergency stop switch It is recommended that the X45 conveyor system should be provided with
one or more emergency stop switches that can be operated within reach
of the user.
The switch must have the standard red colour.
Motor protection Should the motor be overloaded for certain reasons, this should be
detected. Without this protection there is a chance that the Motor or other
components of the X45 system will be damaged.