FlexLink X45 Руководство пользователя - Manual (Page 11)

Safety
Create
d
by EBCCW
0
0
:06
3 5113196-2
1 Safety
The X45 conveyor system has been designed in such a way, that it can be
used and maintained in a safe way. This holds for the application, the cir-
cumstances and the instructions described in the manual. Any person
working with or on this system should study the manual and follow the in-
structions. It is the responsibility of the employer to make sure that the em-
ployee is familiar with and follows these instructions.
The company or the country in which the system is used may require extra
safety measures. This particularly applies to the working conditions. This
manual does not describe how these are to be complied with. In case of
doubt, consult your government or safety officer!
1.1 System information
The project number and/or general drawing number shall always be spec-
ified when communicating with FlexLink with respect to the module.
Figure 1 Module nameplate
The modules nameplate is located on the module near the electrical motor
for the drive unit.
Project number See module nameplate
Supplier FlexLink Systems Polska Sp z o.o.o
Module type: See module nameplate
Date of manufacture See module nameplate
Identification. no. See module nameplate