EXP Computer ThinFax LXM - Manual (Page 30)

APPENDIX C
ERROR MESSAGE
V01, V04: File is not found!
Resolution:
Check for the location of file. Match the path of the file to the
location.
V02, V03, V05: Memory overflow!
Resolution:
Check to see if you have any other applications open and
close them. Make sure you have at least 400K of System
RAM.
M01, M4: EXP ThinFax card not found!
Resolution:
Check to see if the card is securely seated into the slot. Make
sure the TSR,
AD:\BIN\CIC100 /GEN 1@, is being loaded by
the autoexec.bat.
M02: Log file is old. Delete it? Y/N
Resolution:
Older version of MiniFax log may be incompatible with newer
version of MiniFax.
M03: File is not found!
Resolution:
Check for the location of file. Match the path of the file
location.
M05: Missing fax# or file name!
Resolution:
Put in the fax number or file name.
M07, M08: Memory overflow!
Resolution:
Check to see if you have any other applications open and
close them. Make sure you have at least 400K of System
RAM.
M09 : Printer error !
M10: Printer port is not responding!
Resolution:
Check if the printer is power on and the printer =s cable is
connected properly.
M11: File is not in fax format!
Resolution:
The file should have a Amfx@ extension to the file name, i.e.
document.mfx.
M13: No resend for receives log!
M14: No view for send log!
M15: No print for send log!
Resolution:
NONE. Function are not supported
M17: File Lock or Missing!
Resolution:
Phone.pdb may have a password setting. Phone book
application may not have saved the file correctly. Go to
Phone book application undo the password and open and
save Phone book.
C03: C drive is full!
Resolution:
MiniFax requires about 35K per page of free disk space on
your
AC@ drive in order to send a non converted file or to
receive a fax.
C06: File is not in f
ax format !
Resolution:
Check file name extension. Its should be .mfx
C08: ASCII file with .MFX extension!
Resolution:
The extension is a MiniFax graphics file format. It is REAL
ASCII file.
C09: MiniFax file with .MIX extension!
Resolution:
Wrong extension for MiniFax. The file is MiniFax format.
C11: Font file not found!
Resolution:
File named f16x17.dat can not be found.
C13: Can not create .MFX file!
Resolution:
Check to see if you have enough space in your AC@ drive.
C16: Disk may be full. Can not write!
Resolution:
Disk write error during conversion. Check to see if you have
enough space in your
AC@ drive.
E05 : No dial tone !
Resolution:
Make sure that your modem is hooked up to an analog
telephone line.