eLine Technology EPTZ-27IR User Manual - Manual (Page 6)

Operation Manual of P T Z Dome Camera
5
screen.)
¾ Operation crosshair function.(Enable this option, the target can be captured more
effectively with crosshair on the screen.)
¾ Three PTZ tours operation with 8 minutes record of each tour.(Can real-time
monitor and record the action of manual operation)
¾ Six group of programmable vector scans.(including scan speed, dwell time, preshot
and interruption between tours)
¾ Auto flip function with 10 degree move up.
¾ 24 sectors of programmable sectional mask.(Can mask part of the sectors of
camera, which differs depending on different types of camera)
¾ 8 sectors of programmable sectional display.(Can display the name and nature of
concrete position shooting by the camera)
¾ Auto enter function running after self-test of the dome device and auto enter
function running when there is no transmission.(Dwell time can be set from 5 to 999
seconds)
¾ Freeze video picture function.(frozen picture function)
¾ Operation return function.(after executing operation return, the dome device will
return to the previous operation)
¾ Intelligent manual scan function.(execute this function in manual pan operation, you
can adjust the manual pan operation)
¾ Intelligent power off real time memory.(If power is cut off when a certain function is
in operation, the dome device can resume working at where the power is cut off.)
¾ High efficient 3-dimension scan.
¾ Camera zoom in speed limit function.(When it is zooming in, the speed
of the dome device will auto slow down.)
¾ Remote setting of dome address.
¾ The world's most advanced high-power infrared lamp technology:
a. Infrared light power conversion efficiency, heat small, long life, low power, less