Draw-Tite 9480 HIDE-A-GOOSE FIFTH WHEEL ADAPTER - Manual

ASSEMBLY INSTRUCTIONS
Hi-Rise
18K 5TH WHEEL CONVERSION HITCH
(1) Provide this Manual to end user.
(1) Read and follow this Manual every time you use Hitch.
(2) Save this Manual for future reference.
(3) Pass on copies of Manual to any other users or owners of the Hitch.
DEALER/INSTALLER:
END USER :
BRAND &
This hitch is designed to work with Cequent (94XX) series gooseneck heads
utilizing the (44XX) series rails only using the round post assembly.
By using the square post assembly this hitch will also work with the
B & W gooseneck hitch.
BRAND &
WEIGHT RATING
Plastic strips supplied with
this hitch are 1/2” thick.
3/8” thick plastic strips, part
number 58438, are available
for trucks with bed
corrugations that are
shallower.
Figure 1
REF # QTY. DESCRIPTION REF # QTY DESCRIPTION
16 4 5/16 SCREW
17 2 ½ PULL PIN 90 DEGREE
18 2 RETAINING CLIP
19 2 FLATWASHER
20 2 TORSION SPRING
21 2 TUBE SPACER
22 2 ¼-20 HEX BOLT
23 4 5/16-18 NYLON LOCK NUT
24 4 5/16 FLATWASHER
25 1 LABEL PINCH POINT
1 1 SKID PLATE ASSEMBLY
2 1 CENTER SECTION
3 1 BASE ASSEMBLY
4 1 HANDLE TUBE
5 1 HANDLE GRIP
6 1 ROUND POST ASSEMBLY
7 1 SQUARE POST ASSEMBLY
8 4 END CAP
9 2 PLASTIC STRIP
10 1 BAIL PIN
z 2010, 2011 Cequent Performance Products Sheet 1 of 12 9480N 6-22-11 Rev. C
25 1 LABEL, PINCH POINT
26 1 LABEL, OPERATING WARNING
27 1 LABEL, WARNING
28 1 LABEL, RATING
29 1 HANG TAG
30 1 5/8” KNURL BOLT
10 1 BAIL PIN
11 2 3/8 NUT
12 2 3/8 LOCKWASHER
13 2 3/8 CARRIAGE BOLT
14 2 5/8 CONICAL TOOTHED WASHER
15 2 5/8 NYLON LOCK NUT
Printed In China