Draw-Tite 75049 MAX-FRAME RECEIVER - Manual

INSTALLATION INSTRUCTIONS Product No.
SMALL PARTS
PACKAGE 01130-867
ISUZU RODEO
PLYMOUTH, MI
33040
75049
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH. IMPORTANT NOTES
USE ONLY TOWING PRODUCTS SUPPLIED OR APPROVED BOLTS,
LOCKNUTS, AND WASHERS TO INSTALL THIS HITCH
M12 NUT
TOOLS REQUIRED
M19 Socket
M19 Wrench
TORQUE WRENCH
M12 LOCK WASHER
1/2” SERRATED WASHER
M12 BOLT
(OVER)
1. Position hitch against frame rail and bumper bracket on left side and tiedown support on left side.
Remove tiedown hook if it interferes with hitch.
2. Install two M12 bolts with lock washers and serrated washers through top flanges of hitch into existing
weldnuts.
3. On drivers side install two M12 bolts with serrated washers from inside. Install M12 lock washers and
nuts from outside.
4. On passenger side install two M12 bolts with lock washers and serrated washers into weld nuts in
tiedown bracket.
5. Torque three M12 fasteners per side to 60 lb.ft.
For Installation Assistance or Technical Help, Call 1-574-537-6339
N33040-12-06-02 EWO3289 © 2002 TOWING PRODUCTS Litho in USA