Analog Way OPS200 - Manual (Page 50)

The OPS200 allows the creation of user defined presets very easily.
Any setup you have configured on screen, can be stored into one of
the 4 available user presets.
1/ After having configured layers, PIP transitions, logos... on your
screen (see “Working With the RCS” chapter), click on one of the
four available Preset buttons.
2/ In the dropdown menu, choose Save From Main or Save From
Preview to determine which screen you want to memorize the
preset from.
3/ By clicking one of the two options, the RCS will automatically load
and preview the selected Preset.
4/ Click the [TAKE] button to view your preset on the Main screen.
The four OPS200 user presets can be called back at any stage
during your show or event.
1/ Click one of the four available Preset buttons to choose which
memory you wish to use. Select Load to Preview from the
dropdown menu, your preset will appear on the Preview screen.
2/ Once you have selected your preset, simply click the [TAKE]
button to view the result on your main screen.
The OPS200 allows to work with up to 9 stereo inputs, 1 Auxiliary
input, and 2 embedded SDI audio inputs (via the SDI BNC
connectors), all accessible via the Audio menu of the OPS200 , and
which can be affected to one or both of the 2 independant symetrical/
asymetrical outputs of the device.
Working with presets
Working with audio
Creating presets
48