Analog Way OPS200 User Manual

Page 45

The RCS software for your

OPS200

can be viewed as the software version of the

OPS200

front panel menu

section. It allows you to quickly access all of the

OPS200 functions via a single page interface, and easily edit

your settings directly from your laptop or PC.

Before starting with the RCS software, you must establish a connection from your laptop to the

OPS200

you

wish to run.

The RCS software for your

OPS200

is composed of several easily identified sections. The tabs menu

allows you to navigate through the equivalent of the

OPS200

front panel menu items (see also “The OPS200

Menu”). The green window of the RCS represents

your Preview window, and can be used to parameter

sources, frames, layers and logos directly by clicking on the corresponding

button, then navigating

through the different available tabs. The red window of the RCS represents your Main window, and can also
be used much like the front panel of the

OPS200

. Create user presets directly in the RCS main window, by

clicking on one of the four available Preset icons

and setting up your preset in the Preview window. Clear

unwanted steps with the clear button,

reload a fresh copy of your screen via the Reload Main button

make smooth takes directly with your mouse or trackpad with the virtual T-bar.

The Take button will

allow you to view any changes made to your preview screen on your main screen, and Analog Way engineers
have even implemented a Stepback button

to quickly move back to your previous setup in the case of a

manipulation error. The status section

allows for easy monitoring of the connection status.

Software overview