Analog Way OPS200 User Manual

Page 28

Pressing the MENU button in the menu section of the

OPS200

, will display and give you access to the

following items on the menu VFD screen:

- INPUT:

select to configure the 11 individual input types and resolutions.

- MAIN OUT:

select to set the output types and resolutions of the Main output.

- PREVIEW OUT:

in Mixer mode, select to set the output types and resolutions of the Preview output.

- PRESET:

select to store and use presets.

- IMAGE:

select to change source image settings of an input.

- KEYING/TITLING:

select to access keying and titling controls and parameters.

- LAYER:

select to adjust layer size, position, border, transparency or transitions.

- LOGOS/FRAMES:

select to store (record), use and manage logos and frames into the

OPS200.

- AUDIO:

select to access all audio input and output parameters.

- CONTROL:

select to access device software information, LAN settings, reset factory settings, a m o n g s t

other user oriented functions.

To access the

OPS200

menu, press the

[EXIT/MENU]

button in the control section (4). To highlight items in

the menu which will appear on the VFD screen (2), turn the scroll knob (3) left or right to the desired menu

item. When you have reached the desired menu item, press the

[ENTER]

button in the control section (4) to

access that menu function. Pressing the

[ENTER]

button when a selection has been made sets the value to

that selection in the

OPS200

memory. When all settings have been made, press the

[EXIT/MENU]

button to

exit sub-menus and return to the main menu.

* IMPORTANT *:

simply selecting a menu item will not set it to that value. Be sure to press the ENTER button

when parametering the menu items.

4-2. THE OPS200 MENU

Menu navigation

Home menu