6 logos and frames management, 5 live – Analog Way NeXtage 16 User Manual

Page 57

7.4.6 Logos and Frames management

On the Edit section, you can have access to your 8 still slots. Those slots can be filled by logos and frames.

To load the slots, go into the Setup section and click on Logos menu.

Or into the Edit section, under the logos tab, click on the Setup button to access to the slot configuration.

Choose the logo into your library to fill the slot. Other logos setups are available.

7.4.6 Logos and Frames management

Use only the live mode when all your pre-

sets are correctly done and ready to use. This

mode is for live use.

On the right, you will find all your memorized

presets under the tab called “ MEMORIES ”.

A simple drag and drop on the screen will

load your preset into the screen (Program or

Preview).

You can at any time modify a memory by

clicking on the Setup shortcut on the right of

you preset memory.

LABEL: don’t forget that you can affect a

name to your memories.

If you want to change an input into your pre-

set into the live mode, simply use the left

source ribbon and drag and drop your input

into a layer.

Under each preset you have its size and its

duration.

Remember that a preset saved into a screen

with a 1024x768 resolution, will keep its size

into a screen of higher resolution.

If you want the preset to be adapted to the

screen size, use the AUTOSCALE button. With

this function enabled, all presets will be auto-

matically stretched to the right size to fill the

selected screen.

FILTER FEATURE: use the Filter feature to

load and take only some presets information.

Choose between: source, pos/size, trans-

parency, cropping, border, transitions, ef-

fects, timing, speed, flying curves, Native

background and ALL at the same time. Only

the selected feature will be load and take

with the preset. If you want to load the entire

preset, please use ALL.

7.5 Live