CEMB USA C75 (A) User Manual

Page 8

Text mode
Original mode

Cone

Spring

I 0202 - 8

3.6 - GUARD MOUNTING AND ADJUSTMENT

a) Fasten the components to the base as illustrated in specifi c exploded view.
b) The position of the wheel guard when closed can be adjusted with relative screw accessible at the

back. Correct position is the one which keeps the tube exactly horizontal with wheel guard closed.

c) Check that the microswitch is held down when the guard is closed.
d) Adjust the angular position of microswitch control.

3.7 - SPACER WD

When balancing very wide wheels (9”), there is not enough space to turn the distance gauge. To
withdraw the wheel from the machine side, fi t spacer WD on the adapter body and secure it with
the standard issue nuts. When centring the wheel with the cone on the inside, fi t the other cone
as a spacer to obtain spring thrust.

Fig. 4