CEMB USA C75 (A) - Manual (Page 16)

I 0202 - 16 GB
5.4 - USER CONTROL
The wheel balancer can be used simultaneously by 4 different users who, through a simple sequence, can
memorize their work condition and call it when needed. The users’ names can be memorized (Presetting
the customer and user name).
5.4.1 - USER MEMORIZATION
- Preset the dimensions correctly according to the procedures already described in sections
Automatic presetting.
- Press ; the “MENU” window appears on the monitor.
- Press ; a window appears with the list of available USERS. The current user is displayed in red.
- Press the number corresponding to the required USER. The system returns to the initial screen
automatically.
5.4.2 - TO CALL USER
- Perform a measuring spin with any dimensions.
- Press button ; the “MENU” window appears on the screen.
- Press : a window appears with the list of available USERS. The current user is displayed in red.
- Press the number corresponding to the required USER. The system automatically returns to the initial
screen with recalculation of the unbalance values on the basis of the effective dimensions of the USER
called.
N.B. - The dimensions memorized as USER are lost when the machine is switched off.
- The USER control is also valid for the ALU-S dimensions.
- The current USER is always displayed in the Measurements and Dimensions screens.
User memorization
User 1
User 2
User 3
User 4
Cancel