MoTeC ADL2 EDL2 - Manual (Page 9)

MoTeC Overview 7
The warm up display is used to display important engine sensor readings
during engine warm up, eg, RPM, Battery Voltage, Engine Temperature, Oil
Pressure, Oil Temperature & Fuel Pressure.
The bottom display may be used display many other values that may need
checking during warm up.
Practice
The practice display is used to display basic information, plus information to
help the driver improve lap times, eg. Lap Time, Lap / Gain Loss, Maximum
Straight Speed, Minimum Corner Speed or Corner Exit Speed.
The bottom display may be used to display additional information as needed.
Race
The race display is normally used to display minimal information, eg RPM,
Lap Time, Fuel Remaining or Laps Remaining.
The bottom display may be used to display additional information as needed.