MoTeC ADL2 EDL2 - Manual (Page 16)

14 Overview
Measurement Inputs
The ADL2 measurement inputs can be connected to a wide variety of
sensors. This allows the ADL2 to measure vehicle parameters such as:
Suspension Movement, Wheels Speeds, Steering Angle, Engine
Temperature etc.
Input Types
The ADL2 has a number of different input types which are designed to suit
the different types of sensors.
The following inputs are available:
• 20 Voltage Inputs
• 8 Temperature Inputs
• 2 Wide Band Air Fuel Ratio Inputs (Lambda Inputs)
• 4 Switch Inputs
• 4 Digital Inputs
• 4 Wheel Speed
Note that the number of inputs that can be used depends on which options
are enabled. See the Appendix B: Options Summary for details.
Expander Inputs
Additionally up to two E888 or E816 expanders may be connected.
The E888 includes 8 Thermocouple Inputs, 8 Analog Inputs, 4 Digital Inputs
and 8 Auxiliary Outputs.
The E816 includes 16 Analog Inputs, 4 Digital Inputs and 8 Auxiliary Outputs.
Internal Sensors
The ADL2 also includes internal sensors for Battery Voltage and ADL2
Internal Temperature.
Sensors
Different types of sensors are available to suit different types of
measurements.