MoTeC ADL2 EDL2 - Manual (Page 7)

MoTeC Overview 5
Numeric Displays
The three numeric displays (Left, Right and Top Right) can be programmed to
display any value, which may be different for each of the display modes
(Race Practice and Warmup).
Note that each of the three numeric displays has a different number of digits
and are therefore suited to displaying different values. Fox example the Top
Right display can only show values up to a maximum of 199 and is therefore
not suitable for displaying Lap Times, but is suitable for displaying many other
values such as Lap Number of Fuel Remaining, Engine Temperature etc.
The numeric displays can show any channel value plus up to two override
values, which are shown each time their value is updated, this is useful for
values that are updated periodically, for example Lap Time. The override
values are shown for a programmable period of time, for example a numeric
display could normally show the Running Lap Time (which is continuously
updating) then be overwritten by the Lap Time for 10 seconds each time the
Lap Time is updated.
Enunciators for some of the common display values are provided above the
numeric displays, eg. ET (Engine Temperature), OP (Oil Pressure).
Centre Numeric Display