MoTeC ADL2 EDL2 - Manual (Page 34)

32 Dash Manager Software
The USB port is the recommended connection method because it is much
faster however if necessary a MoTeC CAN Cable may be used instead which
should be connected to the printer port.
Installing ADL2 Dash Manager
From a CD-ROM
Place the CD-ROM into the CD drive of the pc.
A new window will appear. This can be navigated in the same way as a web
page.
If it does not appear, click on the Windows Start button and select Run. Type
‘D:\Iindex.htm’
Click on the button marked ‘Software Archive’.
Select the version of ADL2 Dash Manager (or other software) that you wish to
install and click on the name.
When the dialog appears asking you to ‘Open’ or ‘Save’ the selected file,
choose ‘Open’ and then follow the setup program instructions.
From the Internet
Go to the MoTeC web site at www.motec.com.au and select Software
Updates then Current Release Software. Click on one of the ADL2 Dash
Manager link to start the down load and choose to save the file to a location
where it can be easily located after downloading (such as the desktop). After
downloading double click on the file to start the installation process.
Mouse & Keyboard
The ADL2 Dash Manager Software may be operated using the keyboard or a
mouse.
On many Notebook PCs the pointing device (mouse substitute) is difficult to
use and in many cases it is much easier and faster to use the keyboard. For
details on using the keyboard refer to the topic on Windows Keyboard Use
latter in this manual.