MoTeC ADL2 EDL2 - Manual (Page 25)

MoTeC Overview 23
Interpreter
Interpreter is used to analyse the logged data.
Data Logging analysis is covered in a separate manual.
Telemetry Monitor
The Telemetry Monitor software is used to monitor the optional Telemetry link
and allows viewing of the telemetry data in various graphical formats such as
Charts, Bar Graphs and Dial Gauges. It can also show the vehicles current
track position on a track map and compare the current vehicle data to
reference data.
Alarms can also be set to indicate when a particular value, such as Engine
Temperature exceeds a user programmable limit.
BR2Config
This program is used to configure the BR2 beacon receiver via a CAN
connection. BR2 configuration is covered in the BR2 Manual.
Updateable Firmware
The ADL2 control software (firmware) is field updatable so that new software
features can be used as they become available.