B&K Precision 9130 - Manual - Manual (Page 34)

34
parameters include constant current, constant voltage, maximum voltage value and step voltage values.
Command syntax: *SAV
Parameter: 0~49
Example: *SAV 10
*RCL
This command recalls parameter saved previously (using the *SAV command).
Command syntax: *RCL
Parameter: 0~49
Example: *RCL 10
Essential SCPI Commands
SYSTem:ERRor
This command is used to obtain error information from the power supply.
Command syntax: SYSTem:ERRor?
Return parameter: please consult the error information table
Example: SYST:ERR?
SYSTem:VERSion
This command queries the software version.
Command syntax: SYSTem:VERSion?
Return parameter: software version
Example: SYST:VERS?
SYSTem:BEEPer
This command controls the buzzer
Command syntax： SYSTem:BEEPer[:IMMediate]
Example: SYST:BEEP
SYSTem:LOCal
This command can set the instrument to local (operate from front panel) mode
Command syntax: SYSTem:LOCal
Example: SYST:LOC
SYSTem:REMote
This command configures the power supply for remote control mode.
Command syntax: SYSTem:REMote
Example: SYST:REM
SYST:RWLock
This command also sets the instrument to remote control mode. When using this command, it is not
possible to press LOCAL key on the front panel to revert back to manual mode.
Command syntax: SYSTem:RWLock